Molybdenum Disulfide Lithium Grease SS2

High Performance Molybdenum Disulfide Lithium Grease SS2 for Wholesale

Machinery experiencing heavy loads, savage oscillations, and the creeping dread of metal means that the lubrication between components will never be maintained with ordinary grease as it would just evaporates under real pressure. That’s why you need EUBO Tech Molybdenum Disulfide Lithium Grease. We’ve packed the extreme-pressure muscle of MoS₂ into a lithium formulation that sticks to the surface so your pins, bushings, and gears survive the shift. Finally, a grease that shoulders the brutality so your crew can actually focus on production, not prognosis.

EUBO SS2 Molybdenum Disulfide Grease is formulated with molybdenum disulfide (MoS₂) solid lubricant and is designed for long-life metal gears. It offers excellent anti-wear, extreme pressure, and anti-rust performance, capable of carrying heavy loads.

Advantages / Features of SS2 Molybdenum Disulfide Grease:

(1）Made with low-viscosity PAO base oil;

(2）Excellent anti-wear, extreme pressure, and anti-rust properties, capable  of withstanding heavy loads;

(3）Fully synthetic base oil, providing superior low-temperature performance, with an operating range of -45°C to 120°C;

(4）Outstanding corrosion resistance, thermal stability, and chemical stability;

(5）Extremely low volatility;

(6）Superior lubrication performance, long-lasting lubrication, effectively extending the service life of machinery.

Usage Instructions:
Apply the grease in the same way as ordinary lubricating grease—using a brush, spatula, or automatic lubrication device. Ensure the workpiece surface is clean to prevent contamination from oxides, dust, or oil residues, which could affect adhesion.

Packaging:
18 kg per drum

Storage Instructions:

(1）Seal the container tightly after use to avoid product contamination.

(2）Store in a cool, dry place.

(3）Avoid contact with oxidizers, strong acids, or alkaline substances.

Precautions:

(1）Stir thoroughly before use and apply an appropriate amount; smooth the surface after application to prevent oil separation.

(2）Ensure proper ventilation during operation.

(3）Regularly replenish and replace the grease as needed.

(4）Wash hands before eating after contact with the product.

(5）Keep the product and application area clean to prevent contamination by debris, dust, water, or other solvents.

(6）Do not mix greases from different brands or types.

Disclaimer:
The information provided is accurate to the best of our knowledge. However, since conditions of use are beyond our control, this information does not replace the customer’s responsibility to test the product to ensure safety, effectiveness, and suitability for specific applications. Our recommendations shall not be considered as infringement of any patent.

Safety Note:
This document does not include all necessary safety information for handling the product. Please read the product label and Safety Data Sheet (SDS) before use to understand safe handling, potential health hazards, and precautions.

Applications of SS2 Molybdenum Disulfide Grease:

• Heavy construction & mining equipment – Excavator pivot pins, and track rollers that see shock loads and abrasive dust daily.

• Agricultural implements – Plow hinges, harvester knife drives, and baler bearings that face mud, crop acids, and wide temperature swings.

• Industrial gearboxes & open gears – Slow-speed, high-torque drives where EP additives are non-negotiable.

• Steel mill auxiliary bearings – Overhead cranes and furnace door mechanisms that endure radiant heat and intermittent water spray.

Request a Free Quote Today

Technical Parameters of SS2 Molybdenum Disulfide Grease：

Note:

The appearance of the product may vary slightly due to differences in raw materials;

For compatibility with rubber, plastics, and other materials, please refer to the compatibility chart.